id: pushback title: Pushback meta: Find out what a pushback is, and how to issue this command when operating a ground facility within Infinite Flight. order: 1 #
Pushback #
A pushback is a maneuver that can be used by aircraft to position from their parked position, onto a taxiway ready to taxi.
Tip
: General Aviation (GA) and military aircraft (with the exception of the C-130) are not able to perform a pushback maneuver
Step 1
: When an aircraft requests pushback, the aircraft symbol will flash amber on the map as well as their callsign on the flight progress strip
Step 2
: Either tap the aircraft on the map (and then “Other Message”), or the flight progress strip to bring up the communication menu
Step 3
: If it is clear, tap “Pushback Approved > Send”. In all other cases tap “Hold Position”
Tip
: Set a reminder by tapping the aircraft on the map followed by “Set Reminder”. The aircraft and their flight progress strip will flash green when the timer is up!
Flow Control #
Flow Control is a technique used by Controllers to limit the amount of aircraft inbound to a particular destination. This is usually done by holding aircraft at the gate to help stagger departures.
Step 1
: When an aircraft requests pushback, the aircraft symbol will flash amber on the map as well as their callsign on the flight progress strip
Step 2
: If “Flow Control” is in effect, tap the aircraft on the map followed by “Show Information”
Step 3
: From the information tab, check the filed destination
Step 4
: If a large amount of aircraft are inbound to this destination, you can stagger departures by holding aircraft at the gate
Step 5
: Access the communication menu and then tap “Hold Position”
Tip
: Set a reminder by tapping the aircraft on the map followed by “Set Reminder”. The aircraft and their flight progress strip will flash green when the timer is up!